|
ARGWELD® PURGE MONITORS
|
|
The all-new PurgEye™ 100 is the most advanced purge monitor of its kind from the makers of the best-selling MK V Purge Monitor.
This new unit, like the earlier MK V models, is small, portable, easy to use and reliable.
It will monitor O2 levels down to 0.01% (100 PPM) with a high degree of accuracy and comes complete with a stainless steel probe, 6 ft
rubber tubing, aspirator bulb and carrying strap in a custom foam-lined case.
It can be used in a continuous monitoring mode by connecting the tubing to an exhaust port of a purging device or enclosure and allowing the
gas to flow freely over the sensor, or it can be used in a sampling mode by inserting the stainless steel probe into the area being purged or
to an exhaust and using the aspirator bulb to initiate the flow across the sensor.
The Argweld® product line has led the industry in cutting edge weld purging technology for over 30 years, and continues the tradition
with the new PurgEye™ 100 unit that offers even greater accuracy and unmatched features.
The Argweld® PurgEye™ 100 is specifically designed and built for welding applications to give accurate readings at
the low O2 levels required for weld purging. In fact, the PurgEye™ 100 is significantly more accurate than any purge
monitor of its kind. Don’t risk your welds with inferior purge monitors or O2 sensors and monitors designed for confined space or medical
applications that are inaccurate at lower O2 levels.
|
 The PPM Monitor is specifically designed for oxygen monitoring
during the welding of titanium and ultra-pure stainless steel
applications to prevent discoloring or adverse effects on the
weld caused by oxygen.
This unit will accurately read down to 10 parts per million (or
0.001%) on a digital display and offers an audible alarm to
alert the user if the oxygen content has risen above desired
levels. It also incorporates a low maintenance sensor with a
life expectancy of up to five years.
An optional software package is available to interface with a
computer to store and print results and graphs for quality
control purposes. |
 ARGWELD® Critical Weld Purge MonitorThe Critical Weld Purge Monitor is the latest in the line of
Argweld® Purge Monitors. This unit is similar to the Titanium
Weld (PPM) Monitor with a few extra features. It has an
audible alarm if the O2 level rises above a preset limit and a
signal can be used to terminate the welding operation should
this level be exceeded. A unique new low-maintenance sensor
is used which has an indicated five year life expectancy.
An optional software package is available to allow a computer to
be used to store and print results for quality control purposes.
One of the added key features is an automatic pump for
extracting a continuous gas sample where it is not possible to
deliver a constant flow over the sensor.
The ARGWELD® Critical Weld Purge Monitor can be used and
interfaced with all manual and automatic welding techniques,
but will be much appreciated by those requiring sensitive
monitoring of low oxygen levels when joining the more reactive
materials such as titanium alloys and duplex steels.
|
Use the right tool for the job!
|
|