The Resistance Welder Electrode Force Gauge allows electrode force to be measures as often as necessary to ensure that this variable stays within tolerances.

ADVANTAGES:

To improve quality control, ease inspection and for regular calibration of resistance welding machines, COB Industries, Inc. offers a EFG002 force meter for measuring resistance welder electrode force. 

This self contained instrument uses a cell with a force sensor to provide an accurate digital read out for auditing weld electrode forces.

Force can vary because of changing factory air pressure, water in air causing air cylinders to deteriorate, and loss of air pressure due to worn seals. 

As with all welding procedures, it is important to eliminate as many variables as possible in order to achieve optimum welding consistently over a long period.

The Resistance Welder Electrode Force Gauge allows electrode force to be measured as often as necessary to ensure that this variable stays within tolerance, thereby eliminating variations in resistance weld repeatability. 

The weld force is read off a digital display in the handle of the instrument. Special electronics ensure that the true clamp load is displayed rather than any other readings caused by initial head closure shock loads. (Shock loads can be monitored by connecting the instrument to a storage oscilloscope.

This unit has a voltage output which can be linked to a recorder and comes complete with a battery charger with a 110 volt input for its internal nickel cadmium battery. The unit weighs only 2.09 lbs.