|
PRO-TAP
A SERIES PRO-TAP
Power 1100 Watts: 110/220/240 Volts. 4 Speeds: 115/160/190/260 rpm. Magnet: 4520 lbs. (2050kg.). Twist Drill: up to 1-1/4 inches: 3 Morse Taper.. Milling/Cutter: From 1/2 inch (13mm.) up to 3-3/8 inches (85mm.). Tapping: 1-1/8 inches. Chuck: 3/4 inch (20mm.).
The "A" Series Pro-Tap is one of the only 4 speed machines to develop the constant power and four speeds required for tapping holes up to 1-1/4" (30mm.) in diameter. The built in electronic control, when switched to reverse, stops for a pre-set time for added mechanical projection. It is powered by the high toque low rpm AEG B4/32 Motor unit. The "A" Series Pro-Tap also features a spring loaded roller ball fitted to the base which allows the machine to be accurately repositioned on the work surface.
FEATURES
|
|
Powerful four speed motor unit stops for pre-set time prior to operating reverse.
|
|
|
56 lbs. (25kg.). Compact unit for one man operation. |
|
|
Flash tested to 4000 volts. |
|
|
Safety relay switches stop motor is based is not connected. |
|
|
|
|
|
|
Technical Information |
| Motor: AEG B4/32
|
Speed: 115/160/190/260 rpm.
|
| Height: 20" (500mm.)
|
Voltage: 110/220/240 volts
|
| Width: 5-3/8" (135mm.)
|
Milling: 3-3/8" (85mm.)
|
| Length: 12-3/4" (320 mm.) |
Capacity: Drilling 1-1/4" (32mm.)
|
| Weight: 56 lbs. (25kg.)
|
Magnetic Adhesion: 4520 lbs. (2050kg.)
|
| Power: 1100 Watts
|
Chuck Capacity: 3/4" (20mm.)
|
|
|